Acoustic Panels String Light Suspension Kit With Spiral Anchors Stainless Steel

Stainless Steel Cable Suspension Kits With Spiral Anchors For Acoustic Panels

This is a kit that Hanging acoustic panels from ceiling,suspension hardware for acoustic ceiling installations, suspending acoustic panels - rapid economic solutions...

Hanging systems for acoustic panels require special hardware components.

Some modular rockwool panels may be supported using spiral anchors screwed into the panels.

Speedy installation is achieved with adjustable-height support fittings, hanging wires and

ceiling fixings including expanding anchors for concrete ceilings.

Many of these components are also useful for supporting lighting systems and

other electrical installations and building services.

What does this Suspension Kit ( Acoustic Panels Hanging Kit ) contains?

1. 304 Stainless Steel Wire with diecast end;

Cable Size : Ø0.06″ *59″ / (Ø1.5mm*1500mm)

2. Cable Gripper with Hook;

Material : Brass material with Nickel plated

Gripper Size : Ø0.36″ * 2.44″ / (Ø9*52mm)

3.Ceiling Attachment Ceiling;

Material : Brass plated in Nickel

Size : Ø0.7″ * 1.02″ / (Ø18*26MM)

4.Spiral;

Material:Steel

Size:Ø1.18″ * 2″ / (Ø30*51MM)

Screw ceiling anchor with wire

Two-part screw-on ceiling anchor with drop wire

Thimble size bullet fitting nickel finish

Ideal fixing for ceiling panels and lighting

Ceiling anchors for attaching drop wires to plaster ceilings are neat,

quick to install and supplied at low cost.

Suspended services in buildings such as acoustic panels, light fittings etc require rapid and

reliable fixing systems combined with support wires. For lightweight building services

applications 1.5mm wire cable can be relied upon to carry loads in excess of 10 kg per

suspension point. These slender cables are both economical and unobtrusive.

Screw ceiling anchor for conventional ceilings
For plasterboard and similar conventional ceilings which will accept a plug and screw fixing,

the two-part ceiling anchor is screwed to the ceiling capturing the supplied 1m or 2m length of wire.

Suspension hooks self locking

Suspension hooks with self locking facility a ideal for rapid

installation and levelling up on site.

Slide the hook up a support wire (1.5mm dia) and it locks fast wherever it is placed.

To lower simply depress the quick release button as shown on the image. The clutch

mechanism is released until the suspended item is at exactly the right height. Excess

wire can then be snipped off.It is much easier to level up acoustic panels, light fittings

and ceiling hung building services when the adjustment can be performed at the

suspension point rather than at the ceiling.

The safe Hook has a spring catch across the mouth of the hook to

prevent accidental detachment.

Suspension fitting for rockwool acoustic panels

This is a Spiral corkscrew type panel hanger for acoustic panels - Ecophon type panels

Economic alternative to Ecophon panel fixings

Spiral anchors provide a convenient suspension point for certain types of acoustic

ceiling panels made from rockwool which will accept a screw-in corkscrew type fitment.

Acoustic ceiling installers fitting suspended acoustic panels often search for lower

cost installation components.

The spiral anchor and our associated fittings have proved a successful alternative

to the manufacturers' own branded components offering significant savings.

Spiral anchor suspension fittings can be used in conjunction with our ceiling fixings,

suspension cables and adjustable suspension hooks to create a low cost solution.