Yingwei Lighting Accessory Co.,Ltd.
Jonwin Limited (Yingwei Lighting Accessory Co.,Ltd. ) Make The Installation Easy And Flexible!
Add to Cart
Quick Adjustable Cable Grippers Flexible Light Suspension Kit Cable Adjuster
Our grippers are available in a wide range of combinations for many lighting applications,
all grippers are precision engineered for safety. The grippers are compact and feature
outstanding design with an excellent plated finish. We supplies pre-packed component
sets for easy selection and quick installation. Individual grippers with wire rope to
order are also available on request.
Cable Grippers are used for easy, adjustable suspension on the go!
Just slide the gripper onto the cable and you’re set!
Description
| 1. Material | Brass |
| 2. Size | Φ10*53mm / Customized |
| 3. For use with Cable | Ø1.0~Ø1.5mm |
| 4. Finishing Color | Nickel / Customized |
| 5. Application |
They can be used in any room to hang art or signs but they also can be used to hang anything that needs hanging. In the kitchen, pots, pans, pot holders. In a study ribbons and awards. |
| 6. Safe Working Load | 20KG,depends on the cable diamter work with |
What is A Gripper?
A Cable Gripper is an adjustable fastener that automatically grips and locks to any position on an aircraft cable using an internal, spring-loaded 3-ball gripping mechanism. This allows the Gripper to move freely up the cable but not down unless the mechanism is released.
What types of Cable Grippers are available?
There’s a wide variety, but there are two distinct types. The Straight-Thru’ or standard Gripper allows the cable to exit through the Gripper’s thread into the fixture. The Side-Cable-Exit Gripper allows the cable to exit the Gripper from the side of the body before the Gripper enters the fixture, eliminating the possibility of a short circuit.
If this is the first time you've worked with 3-ball aircraft cable compression system,
Please read the following carefully.
When feeding cable into the Gripper, always allow it to pass at least 1” beyond the body of the Gripper.
When cutting off excess cable always leave at least 1” of cable showing. Cables may be cut using purpose-built cutters. Cable will not fray unless passed repeatedly through the Gripper mechanism or otherwise abused. To prevent fraying of freshly cut ends, re-solder or apply a drop of super-glue.
Do not feed excess cable into a lighting fixture housing or junction box containing elctrical wiring.
Use only 7×7 or 7×19 uncoated galvanized or stainless steel aircraft cable.
When installing threaded Grippers DO NOT OVER-TORQUE THE THREADS.
Finger-tighten only and wrench-tighten a quarter turn further, but no more.
Grippers & couplers work best when cable follows their center line. Avoid angled pulls in excess of 5°.
For angled applications use one of our jointed grippers or our sloped ceiling couplers.
