Yingwei Lighting Accessory Co.,Ltd.
Jonwin Limited (Yingwei Lighting Accessory Co.,Ltd. ) Make The Installation Easy And Flexible!
Add to Cart
| Material | Galvanized iron | Type | Loop and Hook |
| MOQ | 2000 PCS | Construction | 1x7;7X7;1x19 etc |
| Wire Diameter | ∅1mm | Carton Size | 35*25*18cm |
| Wire Length | Customized | Lead Time | 7-15 workdays |
| Break load | 10kg | Payment Terms | T/T,Western Union,Paypal |
A safety cable is an important aspect to consider when building or assembling a fixture for two reasons:
Safety Cables can be attached to fixtures to guard them against falling when the primary method of attachment fails.
A tethered cable attached to a fixture’s lenses or enclosures is also a great way to offer easy access and maintenance to fixtures.
Safety cables are an easy way to confidently safeguard against failing lighting components.
Cable (also known as wire rope) is available in many different types of construction. Wire rope consists of strands laid helically around a supporting core. Individual strands are composed of a number of wires laid helically around a center (core) of wire. The lay of a cable is defined by the direction in which the strands are laid into the rope, and by the direction the wire is laid into strands. The cable that is 7 X 7 refers to the number of strands (7) which has (7) wires each. The center strand (core), with 6 strands laid around the core.
In determining the working load of a cable or wire rope, the direct stress plus the shock in bending loads must be considered. To assure long life, a reasonable safety factor should be applied to the working load. Standard industry practice is a 5:1 safety factor for many applications. Higher safety factors are used under certain conditions such as extreme shock loads, aircraft control cables, etc.
The fatigue life of the cable or wire rope will be greatly enhanced with properly designed pulleys. The root, or pulley tread diameter, is critical to the life of the cable.
Zinc Die-Cast Terminals are molded to a cable end that has been “bird-caged”, allowing the molten zinc to adhere to each individual wire. This technology has proven itself in the automotive and aviation industries. We offer a comprehensive range of Zinc Die-Cast terminals.
Swaged Terminals can be made of steel, stainless steel, aluminum, or copper and come in a variety of shapes and sizes.
